As Senior Equipment Engineer you will be responsible for the important technical equipment in the installations. This counts for both rotating and static equipment, such as burners, pumps, barrels and tanks. You will draw up the specifications for components of the installation which the designers and buyers will  use as input.

NEM is currently introducing a PDM surrounding (SmarTeam). These surroundings have been coupled to our 3D CAD surroundings (CATIA). At the set-up and introduction there will be a core role for the Application administrat

The design Engineer cooperates in manufacturing a design of kettle components, on the basis of specifications of the customer, sales, project engineering and legal and IKZ standards. Because of this a detailed design can be made.

Our design department works entirely in 3D with ‘state of the art’ design software (CATIA). The Design Engineer creates the design of the kettle and kettle components where we experience as much as possible the strength of the design software, among other things such as the parametrisation of the design.

As Mechanical Engineer you are responsible for the code calculations of the print parts and management system of the kettle installations. These withstand high pressures and temperatures: 200 bar pressure and 600 degrees temperature are not out of the ordinary.

As a Project Engineer Sales you are responsible for the design of complete waste heat boilers during the sales-phase as well as establishing complete technical propositions for potential clients.

The Project Manager Sales is responsible for the technical and commercial part of quotations for Heat Recovery Steam Generators for the regions and accounts assigned to him. This ranges from receiving the request for quotation (RFQ) to negotiating with the client and finalizing the contract.

In the project team you are the one who decides on the mechanical design of boiler installations and specify complete boiler modules (including heating surfaces, piping, casing, etc.), steam drum, steel structures, flue-gas ducting and stacks. You coordinate/instruct engineering companies and subcontractors to finalize the basic and detailed engineering packages ready for fabrication.  

During the implementation phase of energy projects, the pressure parts and piping engineer is responsible for the Code and pipestress calculations and the associated constructive design of various installations. You keep narrow contact with the constructers and you will lead them.

NEM is currently introducing a 3D CAD (CATIA) system. For the set-up, introduction updating and continuation of the system the Application Engineer is responsible. You are the linking pin between the users, the ICT organization and other business units on this advanced design-system.

In a projectteam you make the decisions regarding the control and instrumentation concept of the boiler installation and you calculate and specify all the belonging components control valves, instruments etc.

You coordinate engineers who are responsible for the mechanical design of boiler installations and specify complete boiler modules (including heating surfaces, interconnecting piping, casing, etc.), steam drum, external piping, steel structures, flue-gas ducting and stacks. You support in coordinating/instructing engineering companies and subcontractors to finalize the basic and detailed engineering packages until drawings ready for fabrication.  

You coordinate engineers who are responsible for the process design of boiler installations and specify all boiler equipment (including burners, pumps, silencers, safeties, valves etc.).

Working with a project team on International Projects!
As member of the project team you decide on pipe routing of the boiler installation, you specify the materials and determine the suspensions. You instruct/coordinate engineering companies and subcontractors who work out your plans regarding fabrication and delivery of the engineering.

The planning engineer supports the departments who are responsible for the realisation of projects. Besides that, the planning engineer also supports the department Sales during the sales stage.

During the implementation phase of energy projects, the structural engineer is responsible for the calculations and the associated constructive design of various installations. You will work together with the mechanical Engineers and you will give them the guidelines for the boiler-structures.

The words are process management. In reality you, as a controller, Electrical & Instrumentation Engineer already know the details of this section.

The department of Process & Equipment Engineering makes the numerical chart, also called Process Flow Diagram (PFD), for the installations based on the process designs definitions (the system description in words). After this chart is made, the Equipment Engineer can make the specifications of the equipment. These specifications are used as input for the Supply department to order the equipment, such as ventilators, pump, burners etc.

Als P&ID Designer verzorg je de schematische weergave van de ketelinstallatie en het bijbehorende equipment. In deze schematische weergave wordt het totale proces (alle onderdelen van het warmtetechnische systeem) vastgelegd.

The Pressure Parts & Piping Engineer makes the mechanical design of all the pressure parts and piping for the boiler installations. During this process there will be close contact with the constructors from different departments. The main task is to make the best possible design for the pressure parts in the boiler installation, which meet all the specifications and codes.

As Planning Engineer Engineering you support the Engineering department with the planning of resources for the projects of NEM Industrial & Utility Boilers. The planning of the projects consists of a large amount of detail and a complex network of sepparate, underlying activities.

The Project Engineer is responsible for all the engineering activities for a project.